Установка звука Alsa

ядро 2.6.34-gentoo-r1
Установка звука Alsa

Ставлю звук на gentoo Alsaconf не видит звуковую карточку.

no supported PnP or PCI card no Legacy drivers are avaliable

при попытке поставить alsa-driver could not find a usable .config in kernel sourse directory

Поддержку alsa я включал в ядро.

Звуковая карта 00:1b.0 Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03) lspci

В общем парился парился, парился парился... Узнал, что мою карточку зовут Realtec ACL268, включил её в ядро в альсе, ноль, еще и альса миксер отвалился
(cannot open mixer: no such file or directory) В общем я в отчаянии

lsmod ничего не выдаёт

cat .config

CONFIG_SND=m 
CONFIG_SND_TIMER=m 
CONFIG_SND_PCM=m 
CONFIG_SND_HWDEP=m 
CONFIG_SND_JACK=y 
CONFIG_SND_SEQUENCER=m 
CONFIG_SND_SEQ_DUMMY=m 
CONFIG_SND_OSSEMUL=y 
CONFIG_SND_MIXER_OSS=m 
CONFIG_SND_PCM_OSS=m 
CONFIG_SND_PCM_OSS_PLUGINS=y 
CONFIG_SND_SEQUENCER_OSS=y 
CONFIG_SND_HRTIMER=m 
CONFIG_SND_SEQ_HRTIMER_DEFAULT=y 
CONFIG_SND_DYNAMIC_MINORS=y 
CONFIG_SND_SUPPORT_OLD_API=y 
# CONFIG_SND_VERBOSE_PROCFS is not set 
# CONFIG_SND_VERBOSE_PRINTK is not set 
# CONFIG_SND_DEBUG is not set 
CONFIG_SND_VMASTER=y 
CONFIG_SND_DMA_SGBUF=y 
# CONFIG_SND_RAWMIDI_SEQ is not set 
# CONFIG_SND_OPL3_LIB_SEQ is not set 
# CONFIG_SND_OPL4_LIB_SEQ is not set 
# CONFIG_SND_SBAWE_SEQ is not set 
# CONFIG_SND_EMU10K1_SEQ is not set 
CONFIG_SND_DRIVERS=y 
# CONFIG_SND_PCSP is not set 
CONFIG_SND_DUMMY=m 
# CONFIG_SND_VIRMIDI is not set 
# CONFIG_SND_MTPAV is not set 
# CONFIG_SND_MTS64 is not set 
# CONFIG_SND_SERIAL_U16550 is not set 
# CONFIG_SND_MPU401 is not set 
# CONFIG_SND_PORTMAN2X4 is not set 
CONFIG_SND_PCI=y 
# CONFIG_SND_AD1889 is not set 
# CONFIG_SND_ALS300 is not set 
# CONFIG_SND_ALS4000 is not set 
# CONFIG_SND_ALI5451 is not set 
# CONFIG_SND_ATIIXP is not set 
# CONFIG_SND_ATIIXP_MODEM is not set 
# CONFIG_SND_AU8810 is not set 
# CONFIG_SND_AU8820 is not set 
# CONFIG_SND_AU8830 is not set 
# CONFIG_SND_AW2 is not set 
# CONFIG_SND_AZT3328 is not set 
# CONFIG_SND_BT87X is not set 
# CONFIG_SND_CA0106 is not set 
# CONFIG_SND_CMIPCI is not set 
# CONFIG_SND_OXYGEN is not set 
# CONFIG_SND_CS4281 is not set 
# CONFIG_SND_CS46XX is not set 
# CONFIG_SND_CS5530 is not set 
# CONFIG_SND_CS5535AUDIO is not set 
# CONFIG_SND_CTXFI is not set 
# CONFIG_SND_DARLA20 is not set 
# CONFIG_SND_GINA20 is not set 
# CONFIG_SND_LAYLA20 is not set 
# CONFIG_SND_DARLA24 is not set 
# CONFIG_SND_GINA24 is not set 
# CONFIG_SND_LAYLA24 is not set 
# CONFIG_SND_MONA is not set 
# CONFIG_SND_MIA is not set 
# CONFIG_SND_ECHO3G is not set 
# CONFIG_SND_INDIGO is not set 
# CONFIG_SND_INDIGOIO is not set 
# CONFIG_SND_INDIGODJ is not set 
# CONFIG_SND_INDIGOIOX is not set 
# CONFIG_SND_INDIGODJX is not set 
# CONFIG_SND_EMU10K1 is not set 
# CONFIG_SND_EMU10K1X is not set 
# CONFIG_SND_ENS1370 is not set 
# CONFIG_SND_ENS1371 is not set 
# CONFIG_SND_ES1938 is not set 
# CONFIG_SND_ES1968 is not set 
# CONFIG_SND_FM801 is not set 
CONFIG_SND_HDA_INTEL=m 
CONFIG_SND_HDA_HWDEP=y 
CONFIG_SND_HDA_RECONFIG=y 
CONFIG_SND_HDA_INPUT_BEEP=y 
CONFIG_SND_HDA_INPUT_BEEP_MODE=1 
CONFIG_SND_HDA_INPUT_JACK=y 
CONFIG_SND_HDA_PATCH_LOADER=y 
CONFIG_SND_HDA_CODEC_REALTEK=y 
# CONFIG_SND_HDA_CODEC_ANALOG is not set 
# CONFIG_SND_HDA_CODEC_SIGMATEL is not set 
CONFIG_SND_HDA_CODEC_VIA=y 
# CONFIG_SND_HDA_CODEC_ATIHDMI is not set 
# CONFIG_SND_HDA_CODEC_NVHDMI is not set 
CONFIG_SND_HDA_CODEC_INTELHDMI=y 
CONFIG_SND_HDA_ELD=y 
# CONFIG_SND_HDA_CODEC_CIRRUS is not set 
# CONFIG_SND_HDA_CODEC_CONEXANT is not set 
# CONFIG_SND_HDA_CODEC_CA0110 is not set 
# CONFIG_SND_HDA_CODEC_CMEDIA is not set 
# CONFIG_SND_HDA_CODEC_SI3054 is not set 
CONFIG_SND_HDA_GENERIC=y 
# CONFIG_SND_HDA_POWER_SAVE is not set 
# CONFIG_SND_HDSP is not set 
# CONFIG_SND_HDSPM is not set 
# CONFIG_SND_HIFIER is not set 
# CONFIG_SND_ICE1712 is not set 
# CONFIG_SND_ICE1724 is not set 
# CONFIG_SND_INTEL8X0 is not set 
# CONFIG_SND_INTEL8X0M is not set 
# CONFIG_SND_KORG1212 is not set 
# CONFIG_SND_LX6464ES is not set 
# CONFIG_SND_MAESTRO3 is not set 
# CONFIG_SND_MIXART is not set 
# CONFIG_SND_NM256 is not set 
# CONFIG_SND_PCXHR is not set 
# CONFIG_SND_RIPTIDE is not set 
# CONFIG_SND_RME32 is not set 
# CONFIG_SND_RME96 is not set 
# CONFIG_SND_RME9652 is not set 
# CONFIG_SND_SONICVIBES is not set 
# CONFIG_SND_TRIDENT is not set 
# CONFIG_SND_VIA82XX is not set 
# CONFIG_SND_VIA82XX_MODEM is not set 
# CONFIG_SND_VIRTUOSO is not set 
# CONFIG_SND_VX222 is not set 
# CONFIG_SND_YMFPCI is not set 
# CONFIG_SND_USB is not set 
# CONFIG_SND_PCMCIA is not set 
CONFIG_SND_SOC=m 
CONFIG_SND_SOC_I2C_AND_SPI=m 
# CONFIG_SND_SOC_ALL_CODECS is not set

aplay -Lунмаск

включи все CONFIG_SND_HDA_CODEC, далее загрузи руками все модуля

aplay -L в студию
унмаск media-sound/codecgraph, инсталл, рун
свг от него - куда нибудь в нет и сюда ссылку

Compute:
Bosch M2.8.1 -> custom Bosch M2.8.3 clone from Russia.
Speed about 260 km,Ram 2 pers.,HDD - 70 kg,210 FLOPS ;)

# aplay -l aplay:

# aplay -l
  aplay: device_list:223: No soundcards found...
# codegraph
  ls: cannot acces /proc/asound/card*/codec*: No sush file or directory
  error: codec file not specified

Всмысле свг?

pri popitke podgruzit modul

pri popitke podgruzit modul

Could not load /lib/modules/2.6.34-gentoo-r1/modules.dep: No such file or ditectory

I russkij yazik otvalilso...

make modules_install после

make modules_install после сборки ядра делали?

alc268 - кажется имел дело с

alc268 - кажется имел дело с таким.
модуль CONFIG_SND_HDA_INTEL=m загрузите а потом попробуйте alsamixer

У меня вообще никакие модули

У меня вообще никакие модули не грузит. lould not load /lib/modules/modules/2.6.34-gentoo-r1/modules.dep : nosuch file or directory
Ща разберусь с поддержкой модулей.. Хм.. Модули всё равно не грузит. При чём lsmod пуст. depmod -a проходит, но ничего не делает, lsmod по прежнему пустует.

А вообще я не устанавливал

А вообще я не устанавливал модули) Все, проблема решена)

http://gentoo.ru/content/chto

Настройки просмотра комментариев

Выберите нужный метод показа комментариев и нажмите "Сохранить установки".