Genkernel вылетает с ошибкой 'compile_generic() failed to compile the "prepare" target!' при установке.

Genkernel вылетает с ошибкой 'compile_generic() failed to compile the "prepare" target!' при установке.
cpu celeron e3300

Вот лог:

>>> Started genkernel v4.2.3 on: 2021-10-10 13:23:53
* Gentoo Linux Genkernel; Version 4.2.3
* Using genkernel configuration from '/etc/genkernel.conf' ...
* Running with options: --menuconfig all
* Resolving config file, command line, and arch default settings.
* TMPDIR defaulted to "/var/tmp/genkernel".
* LOGFILE set in config file to "/var/log/genkernel.log".
* KERNEL_DIR defaulted to "/usr/src/linux".
* KERNEL_SOURCES defaulted to "yes".
* INITRAMFS_FILENAME defaulted to "initramfs-%%KV%%.img".
* INITRAMFS_SYMLINK_NAME defaulted to "initramfs".
* KERNEL_CONFIG_FILENAME defaulted to "kernel-config-%%KV%%".
* KERNEL_FILENAME defaulted to "vmlinuz-%%KV%%".
* KERNEL_SYMLINK_NAME defaulted to "kernel".
* SYSTEMMAP_FILENAME defaulted to "".
* SYSTEMMAP_SYMLINK_NAME defaulted to "".
* COMPRESS_INITRD defaulted to "yes".
* COMPRESS_INITRD_TYPE defaulted to "best".
* CHOST defaulted to "x86_64-pc-linux-gnu".
* MAKEOPTS defaulted to "-j3".
* NICE defaulted to "10".
* KERNEL_AS defaulted to "as".
* KERNEL_AR defaulted to "ar".
* KERNEL_CC defaulted to "gcc".
* KERNEL_CFLAGS not set.
* KERNEL_CXX defaulted to "g++".
* KERNEL_LD defaulted to "ld".
* KERNEL_NM defaulted to "nm".
* KERNEL_MAKE defaulted to "make".
* KERNEL_OBJCOPY defaulted to "objcopy".
* KERNEL_OBJDUMP defaulted to "objdump".
* KERNEL_RANLIB defaulted to "ranlib".
* KERNEL_READELF defaulted to "readelf".
* KERNEL_STRIP defaulted to "strip".
* UTILS_AS defaulted to "as".
* UTILS_AR defaulted to "ar".
* UTILS_CC defaulted to "gcc".
* UTILS_CFLAGS defaulted to "-Os -pipe -fomit-frame-pointer".
* UTILS_CXX defaulted to "g++".
* UTILS_LD defaulted to "ld".
* UTILS_NM defaulted to "nm".
* UTILS_MAKE defaulted to "make".
* UTILS_OBJCOPY defaulted to "objcopy".
* UTILS_OBJDUMP defaulted to "objdump".
* UTILS_RANLIB defaulted to "ranlib".
* UTILS_READELF defaulted to "readelf".
* UTILS_STRIP defaulted to "strip".
* CROSS_COMPILE not set.
* BOOTDIR defaulted to "/boot".
* KERNEL_LOCALVERSION defaulted to "-%%ARCH%%".
* MODPROBEDIR defaulted to "/etc/modprobe.d".
* SPLASH defaulted to "no".
* CLEAR_CACHEDIR defaulted to "no".
* POSTCLEAR defaulted to "no".
* MRPROPER defaulted to "yes".
* MENUCONFIG set on command line to "yes".
* GCONFIG defaulted to "no".
* NCONFIG defaulted to "no".
* XCONFIG defaulted to "no".
* CLEAN defaulted to "yes".
* MODULEREBUILD defaulted to "yes".
* MODULEREBUILD_CMD defaulted to "emerge --ignore-default-opts --buildpkg=n --usepkg=n --quiet-build=y @module-rebuild".
* KERNCACHE not set.
* RAMDISKMODULES defaulted to "yes".
* ALLRAMDISKMODULES defaulted to "no".
* LINUXRC not set.
* MOUNTBOOT defaulted to "yes".
* BUILD_STATIC defaulted to "no".
* SAVE_CONFIG defaulted to "yes".
* SYMLINK defaulted to "no".
* OLDCONFIG defaulted to "yes".
* SANDBOX defaulted to "yes".
* SSH defaulted to "no".
* SSH_AUTHORIZED_KEYS_FILE defaulted to "/etc/dropbear/authorized_keys".
* SSH_HOST_KEYS defaulted to "create".
* STRACE defaulted to "no".
* BCACHE defaulted to "no".
* LVM defaulted to "no".
* DMRAID defaulted to "no".
* ISCSI defaulted to "no".
* HYPERV defaulted to "no".
* BOOTFONT defaulted to "none".
* BOOTLOADER defaulted to "no".
* B2SUM defaulted to "no".
* BUSYBOX defaulted to "yes".
* NFS defaulted to "yes".
* MICROCODE defaulted to "all".
* MICROCODE_INITRAMFS defaulted to "no".
* UNIONFS defaulted to "no".
* NETBOOT defaulted to "no".
* REAL_ROOT not set.
* LUKS defaulted to "no".
* GPG defaulted to "no".
* MDADM defaulted to "no".
* MDADM_CONFIG not set.
* E2FSPROGS defaulted to "no".
* XFSPROGS defaulted to "no".
* ZFS defaulted to "no".
* BTRFS defaulted to "no".
* VIRTIO defaulted to "no".
* MULTIPATH defaulted to "no".
* FIRMWARE defaulted to "no".
* FIRMWARE_DIR defaulted to "/lib/firmware".
* FIRMWARE_INSTALL defaulted to "no".
* INTEGRATED_INITRAMFS defaulted to "no".
* WRAP_INITRD defaulted to "no".
* GENZIMAGE defaulted to "no".
* KEYMAP defaulted to "yes".
* DOKEYMAPAUTO defaulted to "no".
* STRIP_TYPE defaulted to "modules".
* INSTALL defaulted to "yes".
* CLEANUP defaulted to "yes".
* KERNEL_OUTPUTDIR defaulted to "/usr/src/linux".

* Read 'x86_64' from 'uname -m' ...
* ARCH 'x86_64' detected ...
* CBUILD set to 'x86_64-pc-linux-gnu' ...
* CHOST set to 'x86_64-pc-linux-gnu' ...

* Sourcing default modules_load from '/usr/share/genkernel/defaults/modules_load' ...
* Sourcing arch-specific from '/usr/share/genkernel/arch/x86_64/' ...
* Sourcing arch-specific modules_load from '/usr/share/genkernel/arch/x86_64/modules_load' ...
* Using '/usr/src/linux/include/config/kernel.release' to extract LOCALVERSION ...
* KERNEL_ARCH set to 'x86' ...

* GK_FILENAME_CONFIG set to 'kernel-config-5.10.61-gentoo-x86_64' (was: 'kernel-config-%%KV%%')
* GK_FILENAME_KERNEL set to 'vmlinuz-5.10.61-gentoo-x86_64' (was: 'vmlinuz-%%KV%%')
* GK_FILENAME_KERNEL_SYMLINK set to 'kernel' (was: 'kernel')
* GK_FILENAME_SYSTEMMAP set to '' (was: '')
* GK_FILENAME_INITRAMFS set to 'initramfs-5.10.61-gentoo-x86_64.img' (was: 'initramfs-%%KV%%.img')
* GK_FILENAME_INITRAMFS_SYMLINK set to 'initramfs' (was: 'initramfs')
* Checking for suitable kernel configuration ...
* - '/etc/kernels/kernel-config-5.10.61-gentoo-x86_64' not found; Skipping ...
* - '/etc/kernels/kernel-config-x86_64-5.10.61-gentoo-x86_64' not found; Skipping ...
* - '/usr/share/genkernel/arch/x86_64/kernel-config-5.10.61-gentoo-x86_64' not found; Skipping ...
* - '/usr/share/genkernel/arch/x86_64/kernel-config-5.10' not found; Skipping ...

* Working with Linux kernel 5.10.61-gentoo-x86_64 for x86_64
* Using kernel config file '/usr/share/genkernel/arch/x86_64/generated-config' ...
* Note: The version above is subject to change (depends on config and status of kernel sources).

* mount: >> Boot partition is already mounted in read-write mode on '/boot'.

* kernel: >> Initializing ...
* >> --mrproper is set; Skipping 'make clean' ...
* >> Previous config backed up to .config--2021-10-10--13-23-54.bak
* >> Running 'make mrproper' ...
COMMAND: nice -n10 make -j3 ARCH='x86' AS='as' AR='ar' CC='gcc' LD='ld' NM='nm' OBJCOPY='objcopy' OBJDUMP='objdump' READELF='readelf' STRIP='strip' HOSTAR='ar' HOSTCC='gcc' HOSTCXX='g++' HOSTLD='ld' mrproper
CLEAN include/config include/generated arch/x86/include/generated .config .config.old
* >> Copying '/usr/share/genkernel/arch/x86_64/generated-config' to '/usr/src/linux/.config' ...
* >> Running 'make oldconfig' ...
COMMAND: nice -n10 make -j3 ARCH='x86' AS='as' AR='ar' CC='gcc' LD='ld' NM='nm' OBJCOPY='objcopy' OBJDUMP='objdump' READELF='readelf' STRIP='strip' HOSTAR='ar' HOSTCC='gcc' HOSTCXX='g++' HOSTLD='ld' oldconfig
HOSTCC scripts/basic/fixdep
HOSTCC scripts/kconfig/conf.o
HOSTCC scripts/kconfig/confdata.o
HOSTCC scripts/kconfig/expr.o
LEX scripts/kconfig/lexer.lex.c
YACC scripts/kconfig/[ch]
HOSTCC scripts/kconfig/preprocess.o
HOSTCC scripts/kconfig/symbol.o
HOSTCC scripts/kconfig/util.o
HOSTCC scripts/kconfig/lexer.lex.o
HOSTCC scripts/kconfig/
HOSTLD scripts/kconfig/conf
.config:1076:warning: override: CPU_FREQ_DEFAULT_GOV_SCHEDUTIL changes choice state
.config:4954:warning: symbol value 'm' invalid for PINCTRL_BAYTRAIL
.config:6124:warning: symbol value 'm' invalid for SND_INTEL_NHLT
* Restart config...
* Pin controllers
Pin controllers (PINCTRL) [Y/?] y
Debug PINCTRL calls (DEBUG_PINCTRL) [N/y/?] n
AMD GPIO pin control (PINCTRL_AMD) [M/n/y/?] m
Microchip MCP23xxx I/O expander (PINCTRL_MCP23S08) [N/m/y/?] n
Intel Baytrail GPIO pin control (PINCTRL_BAYTRAIL) [N/y/?] (NEW)
Intel Cherryview/Braswell pinctrl and GPIO driver (PINCTRL_CHERRYVIEW) [M/n/y/?] m
Intel Lynxpoint pinctrl and GPIO driver (PINCTRL_LYNXPOINT) [N/m/y/?] n
Intel Broxton pinctrl and GPIO driver (PINCTRL_BROXTON) [M/n/y/?] m
Intel Cannon Lake PCH pinctrl and GPIO driver (PINCTRL_CANNONLAKE) [M/n/y/?] m
Intel Cedar Fork pinctrl and GPIO driver (PINCTRL_CEDARFORK) [M/n/y/?] m
Intel Denverton pinctrl and GPIO driver (PINCTRL_DENVERTON) [M/n/y/?] m
Intel Emmitsburg pinctrl and GPIO driver (PINCTRL_EMMITSBURG) [N/m/y/?] n
Intel Gemini Lake SoC pinctrl and GPIO driver (PINCTRL_GEMINILAKE) [M/n/y/?] m
Intel Ice Lake PCH pinctrl and GPIO driver (PINCTRL_ICELAKE) [M/n/y/?] m
Intel Jasper Lake PCH pinctrl and GPIO driver (PINCTRL_JASPERLAKE) [N/m/y/?] n
Intel Lewisburg pinctrl and GPIO driver (PINCTRL_LEWISBURG) [M/n/y/?] m
Intel Sunrisepoint pinctrl and GPIO driver (PINCTRL_SUNRISEPOINT) [M/n/y/?] m
Intel Tiger Lake pinctrl and GPIO driver (PINCTRL_TIGERLAKE) [M/n/y/?] m
* Power supply class support
Power supply class support (POWER_SUPPLY) [Y/?] y
Power supply debug (POWER_SUPPLY_DEBUG) [N/y/?] n
Expose power supply sensors as hwmon device (POWER_SUPPLY_HWMON) [Y/n/?] y
Generic PDA/phone power driver (PDA_POWER) [N/m/y/?] n
Generic battery support using IIO (GENERIC_ADC_BATTERY) [N/m/?] n
Test power driver (TEST_POWER) [N/m/y/?] n
ADP5061 battery charger driver (CHARGER_ADP5061) [N/m/?] n
CW2015 Battery driver (BATTERY_CW2015) [M/n/?] m
DS2780 battery driver (BATTERY_DS2780) [N/m/y/?] n
DS2781 battery driver (BATTERY_DS2781) [N/m/y/?] n
DS2782/DS2786 standalone gas-gauge (BATTERY_DS2782) [N/m/?] n
SBS Compliant gas gauge (BATTERY_SBS) [N/m/?] n
SBS Compliant charger (CHARGER_SBS) [N/m/?] n
Smart Battery System Manager (MANAGER_SBS) [N/m/?] n
BQ27xxx battery driver (BATTERY_BQ27XXX) [N/m/y/?] n
AXP20x power supply driver (AXP20X_POWER) [N/m/?] n
X-Powers AXP288 Charger (AXP288_CHARGER) [M/n/?] m
X-Powers AXP288 Fuel Gauge (AXP288_FUEL_GAUGE) [M/n/?] m
Maxim MAX17040 Fuel Gauge (BATTERY_MAX17040) [N/m/?] n
Maxim MAX17042/17047/17050/8997/8966 Fuel Gauge (BATTERY_MAX17042) [M/n/?] m
ISP1704 USB Charger Detection (CHARGER_ISP1704) [N/m/y/?] n
MAX8903 Battery DC-DC Charger for USB and Adapter Power (CHARGER_MAX8903) [N/m/y/?] n
TI/National Semiconductor LP8727 charger driver (CHARGER_LP8727) [N/m/?] n
GPIO charger (CHARGER_GPIO) [N/m/y/?] n
Battery charger manager for multiple chargers (CHARGER_MANAGER) [N/m/y/?] n
Analog Devices LT3651 charger (CHARGER_LT3651) [M/n/y/?] m
TI BQ2415x battery charger driver (CHARGER_BQ2415X) [N/m/?] n
TI BQ24190 battery charger driver (CHARGER_BQ24190) [M/n/?] m
TI BQ24250/24251/24257 battery charger driver (CHARGER_BQ24257) [N/m/?] n
TI BQ24735 battery charger support (CHARGER_BQ24735) [N/m/?] n
TI BQ2515X battery charger family (CHARGER_BQ2515X) [N/m/?] n
TI BQ25890 battery charger driver (CHARGER_BQ25890) [N/m/?] n
TI BQ25980 battery charger driver (CHARGER_BQ25980) [N/m/?] n
Summit Microelectronics SMB3XX Battery Charger (CHARGER_SMB347) [M/n/?] m
LTC2941/LTC2943 Battery Gauge Driver (BATTERY_GAUGE_LTC2941) [N/m/?] n
RT5033 fuel gauge support (BATTERY_RT5033) [N/m/?] (NEW)
Richtek RT9455 battery charger driver (CHARGER_RT9455) [N/m/?] n
ROHM bd99954 charger driver (CHARGER_BD99954) [N/m/?] n
* Camera sensor devices
Hynix Hi-556 sensor support (VIDEO_HI556) [N/m/?] n
Sony IMX214 sensor support (VIDEO_IMX214) [N/m/?] n
Sony IMX219 sensor support (VIDEO_IMX219) [N/m/?] n
Sony IMX258 sensor support (VIDEO_IMX258) [N/m/?] n
Sony IMX274 sensor support (VIDEO_IMX274) [N/m/?] n
Sony IMX290 sensor support (VIDEO_IMX290) [N/m/?] n
Sony IMX319 sensor support (VIDEO_IMX319) [N/m/?] n
Sony IMX355 sensor support (VIDEO_IMX355) [N/m/?] n
OmniVision OV2640 sensor support (VIDEO_OV2640) [M/?] m
OmniVision OV2659 sensor support (VIDEO_OV2659) [N/m/?] n
OmniVision OV2680 sensor support (VIDEO_OV2680) [N/m/?] n
OmniVision OV2685 sensor support (VIDEO_OV2685) [N/m/?] n
OmniVision OV2740 sensor support (VIDEO_OV2740) [N/m/?] n
OmniVision OV5647 sensor support (VIDEO_OV5647) [N/m/?] n
OmniVision OV6650 sensor support (VIDEO_OV6650) [N/m/?] n
OmniVision OV5670 sensor support (VIDEO_OV5670) [N/m/?] n
OmniVision OV5675 sensor support (VIDEO_OV5675) [N/m/?] n
OmniVision OV5695 sensor support (VIDEO_OV5695) [N/m/?] n
OmniVision OV7251 sensor support (VIDEO_OV7251) [N/m/?] n
OmniVision OV772x sensor support (VIDEO_OV772X) [N/m/?] n
OmniVision OV7640 sensor support (VIDEO_OV7640) [M/?] m
OmniVision OV7670 sensor support (VIDEO_OV7670) [N/m/?] n
OmniVision OV7740 sensor support (VIDEO_OV7740) [N/m/?] n
OmniVision OV8856 sensor support (VIDEO_OV8856) [N/m/?] n
OmniVision OV9640 sensor support (VIDEO_OV9640) [N/m/?] n
OmniVision OV9650/OV9652 sensor support (VIDEO_OV9650) [N/m/?] n
OmniVision OV13858 sensor support (VIDEO_OV13858) [N/m/?] n
ST VS6624 sensor support (VIDEO_VS6624) [N/m/?] n
mt9m001 support (VIDEO_MT9M001) [N/m/?] n
MT9M032 camera sensor support (VIDEO_MT9M032) [N/m/?] n
mt9m111, mt9m112 and mt9m131 support (VIDEO_MT9M111) [N/m/?] n
Aptina MT9P031 support (VIDEO_MT9P031) [N/m/?] n
Aptina MT9T001 support (VIDEO_MT9T001) [N/m/?] n
Aptina MT9T111/MT9T112 support (VIDEO_MT9T112) [N/m/?] n
Micron mt9v011 sensor support (VIDEO_MT9V011) [M/?] m
Micron MT9V032 sensor support (VIDEO_MT9V032) [N/m/?] n
Aptina MT9V111 sensor support (VIDEO_MT9V111) [N/m/?] n
Siliconfile SR030PC30 sensor support (VIDEO_SR030PC30) [N/m/?] n
Siliconfile NOON010PC30 sensor support (VIDEO_NOON010PC30) [N/m/?] n
Fujitsu M-5MOLS 8MP sensor support (VIDEO_M5MOLS) [N/m/?] n
IMI RDACM20 camera support (VIDEO_RDACM20) [N/m/?] n
Sharp RJ54N1CB0C sensor support (VIDEO_RJ54N1) [N/m/?] n
Samsung S5K6AAFX sensor support (VIDEO_S5K6AA) [N/m/?] n
Samsung S5K6A3 sensor support (VIDEO_S5K6A3) [N/m/?] n
Samsung S5K4ECGX sensor support (VIDEO_S5K4ECGX) [N/m/?] n
Samsung S5K5BAF sensor support (VIDEO_S5K5BAF) [N/m/?] n
SMIA++/SMIA sensor support (VIDEO_SMIAPP) [N/m/?] (NEW)
ET8EK8 camera sensor support (VIDEO_ET8EK8) [N/m/?] n
Samsung S5C73M3 sensor support (VIDEO_S5C73M3) [N/m/?] n
* Display Engine Configuration
AMD DC - Enable new display engine (DRM_AMD_DC) [Y/n/?] y
DCN 3.0 family (DRM_AMD_DC_DCN3_0) [N/y/?] (NEW)
Enable HDCP support in DC (DRM_AMD_DC_HDCP) [Y/n/?] y
AMD DC support for Southern Islands ASICs (DRM_AMD_DC_SI) [Y/n/?] y
Enable kgdb break in DC (DEBUG_KERNEL_DC) [N/y/?] n
* Xen driver support
Xen memory balloon driver (XEN_BALLOON) [Y/n/?] y
Memory hotplug support for Xen balloon driver (XEN_BALLOON_MEMORY_HOTPLUG) [N/y/?] n
Hotplugged memory limit (in GiB) for a PV guest (XEN_MEMORY_HOTPLUG_LIMIT) [512] (NEW)
Scrub pages before returning them to system by default (XEN_SCRUB_PAGES_DEFAULT) [Y/n/?] y
Xen /dev/xen/evtchn device (XEN_DEV_EVTCHN) [M/n/y/?] m
Backend driver support (XEN_BACKEND) [Y/n/?] y
Xen filesystem (XENFS) [M/n/y/?] m
Create compatibility mount point /proc/xen (XEN_COMPAT_XENFS) [Y/n/?] y
Create xen entries under /sys/hypervisor (XEN_SYS_HYPERVISOR) [Y/n/?] y
userspace grant access device driver (XEN_GNTDEV) [M/n/y/?] m
User-space grant reference allocator driver (XEN_GRANT_DEV_ALLOC) [M/n/y/?] m
Allow allocating DMA capable buffers with grant reference module (XEN_GRANT_DMA_ALLOC) [N/y/?] n
Xen PCI-device backend driver (XEN_PCIDEV_BACKEND) [M/n/y/?] m
XEN PV Calls frontend driver (XEN_PVCALLS_FRONTEND) [N/m/y/?] n
XEN PV Calls backend driver (XEN_PVCALLS_BACKEND) [N/y/?] n
XEN SCSI backend driver (XEN_SCSI_BACKEND) [M/n/?] m
Xen ACPI processor (XEN_ACPI_PROCESSOR) [M/n/y/?] m
Xen platform mcelog (XEN_MCE_LOG) [N/y/?] n
Xen symbols (XEN_SYMS) [Y/n/?] y
Use unpopulated memory ranges for guest mappings (XEN_UNPOPULATED_ALLOC) [Y/n/?] y
* Certificates for signature checking
File name or PKCS#11 URI of module signing key (MODULE_SIG_KEY) [certs/signing_key.pem] certs/signing_key.pem
Provide system-wide ring of trusted keys (SYSTEM_TRUSTED_KEYRING) [Y/?] y
Additional X.509 keys for default system keyring (SYSTEM_TRUSTED_KEYS) []
Reserve area for inserting a certificate without recompiling (SYSTEM_EXTRA_CERTIFICATE) [N/y/?] n
Provide a keyring to which extra trustable keys may be added (SECONDARY_TRUSTED_KEYRING) [Y/n/?] y
Provide system-wide ring of blacklisted keys (SYSTEM_BLACKLIST_KEYRING) [Y/n/?] y
Hashes to be preloaded into the system blacklist keyring (SYSTEM_BLACKLIST_HASH_LIST) []
Provide system-wide ring of revocation certificates (SYSTEM_REVOCATION_LIST) [N/y/?] (NEW)
* Kernel Self Protection Project
Kernel Self Protection Project (GENTOO_KERNEL_SELF_PROTECTION) [N/y/?] (NEW)
* Gentoo Linux
Gentoo Linux support (GENTOO_LINUX) [Y/n/?] y
Linux dynamic and persistent device naming (userspace devfs) support (GENTOO_LINUX_UDEV) [Y/n/?] y
Select options required by Portage features (GENTOO_LINUX_PORTAGE) [Y/n/?] y
Print firmware information that the kernel attempts to load (GENTOO_PRINT_FIRMWARE_INFO) [Y/n/?] (NEW)
# configuration written to .config
* >> Invoking menuconfig ...
COMMAND: nice -n10 make -j3 -s -j1 ARCH='x86' AS='as' AR='ar' CC='gcc' LD='ld' NM='nm' OBJCOPY='objcopy' OBJDUMP='objdump' READELF='readelf' STRIP='strip' HOSTAR='ar' HOSTCC='gcc' HOSTCXX='g++' HOSTLD='ld' menuconfig
* >> Ensure that required kernel options for genkernel's initramfs usage are set ...
* - Option 'CONFIG_BLK_DEV_INITRD=y' already set in '/usr/src/linux/.config'; Skipping ...
* - Option 'CONFIG_MMU=y' already set in '/usr/src/linux/.config'; Skipping ...
* - Option 'CONFIG_SHMEM=y' already set in '/usr/src/linux/.config'; Skipping ...
* - Option 'CONFIG_TMPFS=y' already set in '/usr/src/linux/.config'; Skipping ...
* - Option 'CONFIG_TTY=y' already set in '/usr/src/linux/.config'; Skipping ...
* - Option 'CONFIG_UNIX98_PTYS=y' already set in '/usr/src/linux/.config'; Skipping ...
* Determining 'BEST' compression method for initramfs using kernel config '/usr/src/linux/.config' ...
* Checking if we can use 'XZ' compression ...
* Will use 'XZ' compression -- all requirements are met!
* - Option 'CONFIG_RD_XZ=y' already set in '/usr/src/linux/.config'; Skipping ...
* >> Ensure that CONFIG_LOCALVERSION is set ...
* - Setting option 'CONFIG_LOCALVERSION' to '"-x86_64"' in '/usr/src/linux/.config'...
* >> Ensure that required kernel options for early microcode loading support are set ...
* - Setting option 'CONFIG_MICROCODE' to 'y' in '/usr/src/linux/.config'...
* - Adding option 'CONFIG_MICROCODE_AMD' with value 'y' to '/usr/src/linux/.config'...
* - Adding option 'CONFIG_MICROCODE_INTEL' with value 'y' to '/usr/src/linux/.config'...
* >> Re-running 'make oldconfig' due to changed kernel options ...
COMMAND: nice -n10 make -j3 ARCH='x86' AS='as' AR='ar' CC='gcc' LD='ld' NM='nm' OBJCOPY='objcopy' OBJDUMP='objdump' READELF='readelf' STRIP='strip' HOSTAR='ar' HOSTCC='gcc' HOSTCXX='g++' HOSTLD='ld' oldconfig
* Restart config...
* Processor type and features
Symmetric multi-processing support (SMP) [Y/n/?] y
Support x2apic (X86_X2APIC) [Y/n/?] y
Enable MPS table (X86_MPPARSE) [Y/n/?] y
Avoid speculative indirect branches in kernel (RETPOLINE) [Y/n/?] y
x86 CPU resource control support (X86_CPU_RESCTRL) [Y/n/?] y
Support for extended (non-PC) x86 platforms (X86_EXTENDED_PLATFORM) [Y/n/?] y
Numascale NumaChip (X86_NUMACHIP) [N/y/?] n
ScaleMP vSMP (X86_VSMP) [N/y/?] n
SGI Ultraviolet (X86_UV) [Y/n/?] y
Goldfish (Virtual Platform) (X86_GOLDFISH) [N/y/?] n
Intel MID platform support (X86_INTEL_MID) [N/y/?] n
Intel Low Power Subsystem Support (X86_INTEL_LPSS) [Y/n/?] y
AMD ACPI2Platform devices support (X86_AMD_PLATFORM_DEVICE) [Y/n/?] y
Intel SoC IOSF Sideband support for SoC platforms (IOSF_MBI) [Y/?] y
Enable IOSF sideband access through debugfs (IOSF_MBI_DEBUG) [N/y/?] n
Single-depth WCHAN output (SCHED_OMIT_FRAME_POINTER) [Y/n/?] y
Processor family
1. Opteron/Athlon64/Hammer/K8 (MK8)
2. Intel P4 / older Netburst based Xeon (MPSC)
3. Core 2/newer Xeon (MCORE2)
4. Intel Atom (MATOM)
> 5. Generic-x86-64 (GENERIC_CPU)
choice[1-5?]: 5
Old AMD GART IOMMU support (GART_IOMMU) [Y/n/?] y
Enable Maximum number of SMP Processors and NUMA Nodes (MAXSMP) [Y/n/?] y
Multi-core scheduler support (SCHED_MC) [Y/n/?] y
CPU core priorities scheduler support (SCHED_MC_PRIO) [Y/n/?] y
Reroute for broken boot IRQs (X86_REROUTE_FOR_BROKEN_BOOT_IRQS) [Y/n/?] y
Machine Check / overheating reporting (X86_MCE) [Y/n/?] y
Support for deprecated /dev/mcelog character device (X86_MCELOG_LEGACY) [Y/n/?] y
Intel MCE features (X86_MCE_INTEL) [Y/n/?] y
AMD MCE features (X86_MCE_AMD) [Y/n/?] y
Machine check injector support (X86_MCE_INJECT) [M/n/y/?] m
IOPERM and IOPL Emulation (X86_IOPL_IOPERM) [Y/n/?] y
Dell i8k legacy laptop support (I8K) [M/n/y/?] m
CPU microcode loading support (MICROCODE) [Y/n/?] y
Intel microcode loading support (MICROCODE_INTEL) [Y/n/?] y
AMD microcode loading support (MICROCODE_AMD) [Y/n/?] y
Ancient loading interface (DEPRECATED) (MICROCODE_OLD_INTERFACE) [N/y/?] (NEW)
/dev/cpu/*/msr - Model-specific register support (X86_MSR) [M/n/y/?] m
/dev/cpu/*/cpuid - CPU information support (X86_CPUID) [M/n/y/?] m
Enable 5-level page tables support (X86_5LEVEL) [Y/n/?] y
Enable statistic for Change Page Attribute (X86_CPA_STATISTICS) [N/y/?] n
AMD Secure Memory Encryption (SME) support (AMD_MEM_ENCRYPT) [Y/n/?] y
Activate AMD Secure Memory Encryption (SME) by default (AMD_MEM_ENCRYPT_ACTIVE_BY_DEFAULT) [N/y/?] n
NUMA Memory Allocation and Scheduler Support (NUMA) [Y/n/?] y
Old style AMD Opteron NUMA detection (AMD_NUMA) [Y/n/?] y
ACPI NUMA detection (X86_64_ACPI_NUMA) [Y/n/?] y
NUMA emulation (NUMA_EMU) [N/y/?] n
Enable sysfs memory/probe interface (ARCH_MEMORY_PROBE) [Y/n/?] y
Support non-standard NVDIMMs and ADR protected memory (X86_PMEM_LEGACY) [M/n/y/?] m
Check for low memory corruption (X86_CHECK_BIOS_CORRUPTION) [Y/n/?] y
Set the default setting of memory_corruption_check (X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK) [N/y/?] n
Amount of low memory, in kilobytes, to reserve for the BIOS (X86_RESERVE_LOW) [64] 64
MTRR (Memory Type Range Register) support (MTRR) [Y/?] y
MTRR cleanup support (MTRR_SANITIZER) [Y/n/?] y
MTRR cleanup enable value (0-1) (MTRR_SANITIZER_ENABLE_DEFAULT) [0] 0
MTRR cleanup spare reg num (0-7) (MTRR_SANITIZER_SPARE_REG_NR_DEFAULT) [1] 1
Memory Protection Keys (X86_INTEL_MEMORY_PROTECTION_KEYS) [Y/n/?] y
TSX enable mode
> 1. off (X86_INTEL_TSX_MODE_OFF)
choice[1-3?]: 1
EFI runtime service support (EFI) [Y/n/?] y
Timer frequency
1. 100 HZ (HZ_100)
2. 250 HZ (HZ_250)
> 3. 300 HZ (HZ_300)
4. 1000 HZ (HZ_1000)
choice[1-4?]: 3
kexec system call (KEXEC) [Y/n/?] y
kexec file based system call (KEXEC_FILE) [Y/n/?] y
Verify kernel signature during kexec_file_load() syscall (KEXEC_SIG) [Y/n/?] y
Require a valid signature in kexec_file_load() syscall (KEXEC_SIG_FORCE) [N/y/?] n
Enable bzImage signature verification support (KEXEC_BZIMAGE_VERIFY_SIG) [Y/n/?] y
kernel crash dumps (CRASH_DUMP) [Y/n/?] y
kexec jump (KEXEC_JUMP) [Y/n/?] y
Physical address where the kernel is loaded (PHYSICAL_START) [0x1000000] 0x1000000
Build a relocatable kernel (RELOCATABLE) [Y/n/?] y
Randomize the address of the kernel image (KASLR) (RANDOMIZE_BASE) [Y/n/?] y
Alignment value to which kernel should be aligned (PHYSICAL_ALIGN) [0x1000000] 0x1000000
Randomize the kernel memory sections (RANDOMIZE_MEMORY) [Y/n/?] y
Set default setting of cpu0_hotpluggable (BOOTPARAM_HOTPLUG_CPU0) [N/y/?] n
Debug CPU0 hotplug (DEBUG_HOTPLUG_CPU0) [N/y/?] n
Disable the 32-bit vDSO (needed for glibc 2.3.3) (COMPAT_VDSO) [N/y/?] n
vsyscall table for legacy applications
> 2. Emulate execution only (LEGACY_VSYSCALL_XONLY)
choice[1-3?]: 2
Built-in kernel command line (CMDLINE_BOOL) [N/y/?] n
Kernel Live Patching (LIVEPATCH) [Y/n/?] y
# configuration written to .config
* >> Checking if required kernel options are still present ...
* - 'CONFIG_TMPFS' is set to 'y'
* - 'CONFIG_TTY' is set to 'y'
* - 'CONFIG_UNIX98_PTYS' is set to 'y'
* - 'CONFIG_MICROCODE' is set to 'y'
* - 'CONFIG_MICROCODE_AMD' is set to 'y'
* - 'CONFIG_MICROCODE_INTEL' is set to 'y'
* - 'CONFIG_RD_XZ' is set to 'y'
COMMAND: nice -n10 make -j3 ARCH='x86' AS='as' AR='ar' CC='gcc' LD='ld' NM='nm' OBJCOPY='objcopy' OBJDUMP='objdump' READELF='readelf' STRIP='strip' HOSTAR='ar' HOSTCC='gcc' HOSTCXX='g++' HOSTLD='ld' prepare
SYNC include/config/auto.conf.cmd
SYSTBL arch/x86/include/generated/asm/syscalls_32.h
SYSHDR arch/x86/include/generated/asm/unistd_32_ia32.h
WRAP arch/x86/include/generated/uapi/asm/bpf_perf_event.h
WRAP arch/x86/include/generated/uapi/asm/errno.h
WRAP arch/x86/include/generated/uapi/asm/fcntl.h
WRAP arch/x86/include/generated/uapi/asm/ioctl.h
WRAP arch/x86/include/generated/uapi/asm/ioctls.h
WRAP arch/x86/include/generated/uapi/asm/ipcbuf.h
WRAP arch/x86/include/generated/uapi/asm/param.h
WRAP arch/x86/include/generated/uapi/asm/poll.h
WRAP arch/x86/include/generated/uapi/asm/resource.h
WRAP arch/x86/include/generated/uapi/asm/socket.h
SYSHDR arch/x86/include/generated/asm/unistd_64_x32.h
WRAP arch/x86/include/generated/uapi/asm/sockios.h
WRAP arch/x86/include/generated/uapi/asm/termbits.h
WRAP arch/x86/include/generated/uapi/asm/termios.h
WRAP arch/x86/include/generated/uapi/asm/types.h
SYSTBL arch/x86/include/generated/asm/syscalls_64.h
HOSTCC arch/x86/tools/relocs_32.o
HOSTCC arch/x86/tools/relocs_64.o
HOSTCC arch/x86/tools/relocs_common.o
HOSTLD arch/x86/tools/relocs
UPD include/config/kernel.release
WRAP arch/x86/include/generated/asm/early_ioremap.h
WRAP arch/x86/include/generated/asm/export.h
WRAP arch/x86/include/generated/asm/mcs_spinlock.h
WRAP arch/x86/include/generated/asm/irq_regs.h
WRAP arch/x86/include/generated/asm/local64.h
WRAP arch/x86/include/generated/asm/mm-arch-hooks.h
WRAP arch/x86/include/generated/asm/mmiowb.h
WRAP arch/x86/include/generated/asm/
WRAP arch/x86/include/generated/asm/rwonce.h
UPD include/generated/uapi/linux/version.h
UPD include/generated/utsrelease.h
HOSTCC scripts/genksyms/genksyms.o
YACC scripts/genksyms/[ch]
LEX scripts/genksyms/lex.lex.c
HYPERCALLS arch/x86/include/generated/asm/xen-hypercalls.h
HOSTCC scripts/genksyms/
SYSHDR arch/x86/include/generated/uapi/asm/unistd_32.h
SYSHDR arch/x86/include/generated/uapi/asm/unistd_64.h
SYSHDR arch/x86/include/generated/uapi/asm/unistd_x32.h
HOSTCC scripts/genksyms/lex.lex.o
error: Cannot generate ORC metadata for CONFIG_UNWINDER_ORC=y, please install libelf-dev, libelf-devel or elfutils-libelf-devel
make: *** [Makefile:1236: prepare-objtool] Error 1
make: *** Waiting for unfinished jobs....
HOSTCC scripts/selinux/genheaders/genheaders
HOSTCC scripts/selinux/mdp/mdp
HOSTCC scripts/bin2c
HOSTCC scripts/kallsyms
HOSTCC scripts/recordmcount
HOSTCC scripts/sorttable
HOSTLD scripts/genksyms/genksyms
HOSTCC scripts/asn1_compiler
HOSTCC scripts/sign-file
HOSTCC scripts/extract-cert

* ERROR: compile_generic() failed to compile the "prepare" target!
* Please consult '/var/log/genkernel.log' for more information and any
* errors that were reported above.
* Report any genkernel bugs to and
* assign your bug to

. Please include
* as much information as you can in your bug report; attaching
* '/var/log/genkernel.log' so that your issue can be dealt with effectively.
* Please do *not* report kernel compilation failures as genkernel bugs!

* mount: >> Boot partition state on '/boot' was not changed; Skipping restore boot partition state ...
>>> Ended on: 2021-10-10 13:24:45 (after 0 days 0 hours 00 minutes 53 seconds)


Для начала сориентируйтесь на словах "error".

Мда... народ читает только

Мда... народ читает только последние пару строк... :(

Спасибо, разобрался. Но вот с

Спасибо, разобрался. Но вот с sshd проблемы.
При загрузке:
start-stop-daemon: did not create a valid pid `/run/'

Покажи systemctl status sshd

Покажи systemctl status sshd

Настройки просмотра комментариев

Выберите нужный метод показа комментариев и нажмите "Сохранить установки".