[РЕШЕНО] ERROR: Failed to compile the "modules" target...

Здравствуйте! Устанавливаю систему по хэндбуку. Устанавливаю исходники emerge gentoo-sourse, устанавливаю ядро генкернел emerge genkernel, выбираю genkernel all и вываливается ошибка

* Gentoo Linux Genkernel; Version 3.4.24_p2
* Running with options: all

* Linux Kernel 3.4.9-gentoo for x86_64...
* kernel: Using config from /usr/share/genkernel/arch/x86_64/kernel-config
* kernel: >> Running mrproper...
*         >> Running oldconfig...
* kernel: >> Cleaning...
*         >> Compiling 3.4.9-gentoo bzImage...
*         >> Not installing firmware as it's included in the kernel already (CONFIG_FIRMWARE_IN_KERNEL=y)...
*         >> Compiling 3.4.9-gentoo modules...
* ERROR: Failed to compile the "modules" target...

* -- Grepping log... --

  SHIPPED scripts/kconfig/zconf.lex.c
  SHIPPED scripts/kconfig/zconf.hash.c
  HOSTCC  scripts/kconfig/zconf.tab.o
  HOSTLD  scripts/kconfig/conf
scripts/kconfig/conf --oldconfig Kconfig
.config:2860:warning: symbol value 'm' invalid for RTC_LIB
.config:2861:warning: symbol value 'm' invalid for RTC_CLASS
--
choice[1]: 1
Sparse Memory virtual memmap (SPARSEMEM_VMEMMAP) [Y/n/?] y
Allow for memory hot-add (MEMORY_HOTPLUG) [N/y] n
Allow for memory compaction (COMPACTION) [N/y/?] (NEW) Enable KSM for page merging (KSM) [N/y/?] n
Low address space to protect from user allocation (DEFAULT_MMAP_MIN_ADDR) [4096] 4096
Enable recovery from hardware memory errors (MEMORY_FAILURE) [N/y/?] n
--
  Thermal Zone (ACPI_THERMAL) [M/n/?] m
  Debug Statements (ACPI_DEBUG) [N/y/?] n
  PCI slot detection driver (ACPI_PCI_SLOT) [N/m/y/?] n
  Container and Module Devices (EXPERIMENTAL) (ACPI_CONTAINER) [M/y/?] m
  Smart Battery System (ACPI_SBS) [N/m/y/?] n
  Hardware Error Device (ACPI_HED) [N/m/y/?] n
  Boottime Graphics Resource Table support (ACPI_BGRT) [N/m/y/?] (NEW)   ACPI Platform Error Interface (APEI) (ACPI_APEI) [N/y/?] n
--
* Bus options (PCI etc.)
*
PCI support (PCI) [Y/n/?] y
  Support mmconfig PCI config space access (PCI_MMCONFIG) [Y/n] y
  PCI Express support (PCIEPORTBUS) [Y/n/?] y
    Root Port Advanced Error Reporting support (PCIEAER) [Y/n/?] y
      PCI Express ECRC settings control (PCIE_ECRC) [N/y/?] n
      PCIe AER error injector support (PCIEAER_INJECT) [N/m/y/?] n
--
  * Wireless
  *
  Wireless (WIRELESS) [Y] y
    cfg80211 - wireless configuration API (CFG80211) [M/n/?] m
      nl80211 testmode command (NL80211_TESTMODE) [N/y/?] n
      enable developer warnings (CFG80211_DEVELOPER_WARNINGS) [N/y/?] n
--
  Symbios 53c500 PCMCIA support (PCMCIA_SYM53C500) [M/n/?] m
*
* Serial ATA and Parallel ATA drivers
*
Serial ATA and Parallel ATA drivers (ATA) [M/n/y/?] m
  Verbose ATA error reporting (ATA_VERBOSE_ERROR) [Y/n/?] y
--
NILFS2 file system support (EXPERIMENTAL) (NILFS2_FS) [N/m/y/?] n
Dnotify support (DNOTIFY) [Y/n/?] y
Inotify support for userspace (INOTIFY_USER) [Y/n/?] y
Filesystem wide access notification (FANOTIFY) [N/y/?] (NEW) Quota support (QUOTA) [Y/?] y
Report quota messages through netlink interface (QUOTA_NETLINK_INTERFACE) [N/y/?] n
Print quota warnings to console (OBSOLETE) (PRINT_QUOTA_WARNING) [Y/n/?] y
--
RCU CPU stall timeout in seconds (RCU_CPU_STALL_TIMEOUT) [60] (NEW) Print additional diagnostics on RCU CPU stall (RCU_CPU_STALL_INFO) [N/y/?] (NEW) Enable tracing for RCU (RCU_TRACE) [N/y/?] n
Self test for the backtrace code (BACKTRACE_SELF_TEST) [N/m/y/?] n
Force extended block device numbers and spread them (DEBUG_BLOCK_EXT_DEVT) [N/y/?] n
Force weak per-cpu definitions (DEBUG_FORCE_WEAK_PER_CPU) [N/y/?] n
Debug access to per_cpu maps (DEBUG_PER_CPU_MAPS) [N/y/?] n
CPU notifier error injection module (CPU_NOTIFIER_ERROR_INJECT) [N/m/y/?] n
--
  CC [M]  drivers/net/wireless/b43/pcmcia.o
  LD [M]  drivers/net/wireless/b43/b43.o
  CC [M]  drivers/net/wireless/b43legacy/main.o
  CC [M]  drivers/scsi/iscsi_boot_sysfs.o
  CC [M]  drivers/scsi/advansys.o
drivers/scsi/advansys.c:71:2: предупреждение: #warning this driver is still not properly converted to the DMA API
--
  CC [M]  drivers/net/wireless/rt2x00/rt2x00mac.o
  CC [M]  drivers/scsi/lpfc/lpfc_nportdisc.o
  CC [M]  drivers/net/wireless/rt2x00/rt2x00config.o
  CC [M]  drivers/net/wireless/rt2x00/rt2x00queue.o
  CC [M]  drivers/scsi/lpfc/lpfc_scsi.o
cc1: warnings being treated as errors
--
  LD [M]  drivers/net/wireless/zd1211rw/zd1211rw.o
make: *** [drivers] Ошибка 2
* Gentoo Linux Genkernel; Version 3.4.24_p2
* Running with options: all

* ERROR: Failed to compile the "modules" target...

* -- End log... --

* Please consult /var/log/genkernel.log for more information and any
* errors that were reported above.

* Report any genkernel bugs to bugs.gentoo.org and
* assign your bug to . Please include
* as much information as you can in your bug report; attaching
* /var/log/genkernel.log so that your issue can be dealt with effectively.
* 
* Please do *not* report compilation failures as genkernel bugs!
* 

Вот содержание make.conf (не знаю на что грешить)

CFLAGS="-march=native -O2 -pipe"
CXXFLAGS="${CFLAGS}"
MAKEOPTS="-j5"

CHOST="x86_64-pc-linux-gnu"

USE="-ipv6 mmx sse sse2 logrotate"

VIDEO_CARDS="nouveau"

INPUT_DEVICES="evdev synaptics mouse"

LINGUAS="en ru"

Все по хандбуку же =/